Mic Shock Mounts
 |
 Shure SM27 Large Diaphragm Condenser Microphone with Case Shockmount Bag  US $299.00
|
 Shure SM27 Lrg Diaph Cond Mic w Case Shockmount Bag US $299.00
|
How The Shure KSM27 Can Improve Your Sound Production
How The Shure KSM27 Can Improve Your Sound Production
By current standards the Shure KSM27 is the best solution for great sound production. There are unique benefits associated with this cardioid capacitor microphone. A condenser tool belies the entry level of the specifications. Sound is controlled using a balanced and professional approach. Different timbres can be supported by smooth toning.
Users can expect a diaphragm capsule that measures one inch. It benefits from mesh protection. A low cut is achieved by switches in different ranges. You can use either the 6 dB/oc or the flat variety. The pricing model for this microphone is ideally suited to the middle range market and is no higher than average.
The sound production advantages of this microphone. Users will benefit from a first class tonal balance model as well as a shock mount although there is no protective cover when you are not using the tool. The sound specifications stand at 18Db which is 80 Hz per octave or a maximum of 115 Hz. Where the sounds are lower than 17 Hz, there is a subsonic filter which works well with the preamp circuit.
A thin capsule at 2.5um is layered with gold to hold the Mylar diaphragm. There is an elastic suspension for those practical moments. Although there is no traditional locking ring, a direct mount is adequate. Of course you can still use manual methods to tightening the shock.
Concentrating on the functionality of the product. The manufacturing process has been able to maintain signal purity using Class-A preamp circuits which do not have a transformer. Therefore crossover distortion is largely avoided. Both negative and positive voltage excursions can be kept under control. You can get functionality with a phantom power source measuring between 11 and 53 volts.
The user manual recommends that you should not go beyond forty eight volts in order to achieve maximum sensitivity. The MIC can be secured by a screw ring at the base. In addition the attenuator controls SPL variations. Even if you are recording in a large room, the Shure KSM27 can work well.
Thanks for taking the time to read my article and I hope it has helped you a lot, if you want more information, I highly recommend you to click here!: shure ksm9 and beat maker download
Samson SP01 Microphone Shock Mount Review
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.