Behringer Powerplay Pro
![]() |
![]() Beyerdynamic DT 880 Pro Behringer HA8000 Powerplay US $325.01
|
![]() Behringer HA8000 Powerplay Beyerdynamic DT 880 Pro St US $325.01
|
![]() Beyerdynamic DT 770 PRO 250 Behringer HA8000 Powerplay US $299.99
|
![]() Behringer HA8000 Powerplay Beyerdynamic DT 250 80 Pro US $263.66
|
![]() Behringer Powerplay Pro 8 HA8000 US $215.00
|
![]() Behringer HA4700 Powerplay Pro XL Headphone Amplifier US $189.00
|
![]() Behringer Powerplay PRO 8 HA8000 Headphone Amplifer US $142.99 |
![]() Behringer Powerplay PRO 8 HA 8000 Headphone Amp US $142.99
|
![]() BEHRINGER POWERPLAY PRO HA8000 HEADPHONE AMPLIFIER NEW US $142.99
|
![]() Behringer POWERPLAY PRO XL HA4700 Headphones Amp System US $119.99
|
![]() Behringer POWERPLAY PRO XL HA4700 HEADPHONE AMP US $119.99
|
![]() Behringer POWERPLAY PRO XL HA4700 Headphone Amp US $119.99
|
![]() BEHRINGER POWERPLAY PRO XL HA4700 4 CHANNEL PROXL 4CH HEADPHONE AMPLIFIER AMP US $99.99
|
![]() Behringer Powerplay PRO XL HA4700 US $95.00
|
![]() POWERPLAY PRO XL HA4700 BEHRINGER US $59.95
|
How do I connect my m-audio Delta1010LT to my Behringer ultragain pro-8 digital?
I have been an active musician for many years and recently became interested in digital audio recording. I have an M-Audio Delta1010LT soundcard, a Behringer ultragain pro-8 digital, and a Behringer Powerplay Pro XL headphone amp. I know how to use all of this stuff, but the problem is I don't know how to connect it all =( the in/out on the ultragain pro-8 digital are "adat" and my soundcard doesn't have "adat" ins. I don't know if this matters or not but I am using protools. Is there something that I am missing? do I use a different cable? Basically I need to know what cables to use, do I need anything else? and how do I connect my stuff? I would be eternally greatful if somebody could help me out. Thanks!
-Matt
Oh and here are links to my equipment:
http://www.m-audio.com/products/en_us/Delta1010LT-main.html
http://www.behringer.com/ADA8000/index.cfm?lang=eng
http://www.behringer.com/HA4700/index.cfm?lang=eng
You need 8 unbalanced Cannon to RCA cables to connect ADA to M-audio but in this way you will use ADA as an analogical device.For digital you need a ADAT to MIDI, or a ADAT to S/PDIF adapter.
For HA you need RCA to Jack cables to connect the M-audio outputs to Hamp.Notice that M-audio has 8 mono in/out's or 4 stereo in/out's and if you want headphones for each channels you will have to use mono headphones.
BEHRINGER POWERPLAY PRO-8 HA8000 Demo
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.


US $325.01





























Comments are closed.